TrekBuddy

[towcat]

... no problem with GPX tracklogs, but when i select NMEA the internal GPS receiver does not start, and on the menu we can see all the time "start" (...whereas with GPX, when started, we can see "pause" or "stop")

this was my morning report

> on the 6110 do not make maps over 1100x1100, that will make all the time an over memory error...
I use TBmapper and googleMV for my maps.

Thanks to you for this soft.

[kruch]

No error displayed?

[towcat]

nothing happens...



another bug seen on the 6110 (i would put this one more on a mobile problem...) > sometimes on an information message (100% brightness or another) trekbuddy run all the time, but the displayed message do not go away ; any button send me on the phone menu... the only issue is to reboot the phone. (rarely)

[kruch]

That's weird. Do you have recent firmware in the phone?

[towcat]

yes, the last available...

little 2 kms walk with trekbuddy on googlemap sattelite view, really nice

i recover gpx datas on GPS action replay for testing, that's an interesting solution...

[kruch]

Could you try the attached version?

[towcat]

euuuuuuuh... what did you changed??

... there are nearly 5/10 minutes a new firmware was available...


after flashing this one, the first try with trekbuddy in NMEA mode worked

> should i try this new version anyway?

tell me, i can if you want. Thanks Krush

[kruch]

[towcat]

all right!

> well i replaced the Trekbuddy program with the new one, it seems there is not a lot of difference at first seen...

> would there be another french translation? (or would it come from the firmware replacement)

> it seems Trackbuddy reload the map and loose the current cursor position when i start ... (previously the cursor did not move, here it goes at the top corner of the map, as when we load a new map...)



> as seen since the firmware replacement, both modes GPX / NMEA works on the mobile...

i keep this version or should i re-install the previous one?

[towcat]

> i re installed the previous version (this one which was in the "6110 serial" post...)

> i have a problem with a french accent in the menu ( "Param?tres" whereas in your new one it was good... "Paramètres" )

> no cursor moving when starting

> cursor moves faster than in the new version...


?

[kruch]

The version here is more kosher, but - if the older version works for you, ok then...

* "no cursor moving when starting" means what? if you uninstall existing version, persisted data (like position on startup map) are removed; but, if you install a another version over the existing one, the data should be kept

* scrolling speed - I think I'll make it configurable

[towcat]

good idea !

> i explain myself :
in the previous version, when i "started" the positionning by the menu (start ), the cursor which was where i placed it stayed at the same place...

in the version you put yesterday, when i choose "start" in the menu and begin the positionning, the icon goes just like you reload another map > at the upper left corner of the map.
each time i start.

what do you mean by "kosher"?? 'scuse me, from france i have to translate

thanks kruch

[kruch]

Really? Wasn't your current position in the upper left corner?

This version is more appropriate from the API usage point of view when it comes to NMEA logging in the Internal provider. But - whatever works is good

[towcat]

the "old" version worked this afternoon well

Thanks Krush

> a detail :
I made satellite maps (scale "14" on googleMV2) with 1100x1100 parts...
>> .tar maps load well, but by unpack files and put them in the good directory, maps load really faster.

i put all my maps unpacked. (100 mo each map... )